Braviga Rear Cube 200 Cycle Light

The Braviga Rear Cube 200 Cycle Light, an innovative cycling accessory featuring a brake sensor and a secure mode for enhanced safety. Item number: CUBE200. This light comes with a seatpost mount and a seat rail mount.

Equipped with a smart brake sensor and a dependable safe mode, this rear light is designed to elevate your cycling experience. Crafted from a combination of aluminum alloy frame and durable PC materials, its construction ensures reliability and longevity.

Charging is convenient with the Type-C port, making it easy to power up the light. Emitting a maximum of 50 lumens in a radiant red hue, this light enhances visibility while cycling, promoting safety on the road. The color scheme showcases a sleek matt black exterior complemented by a vibrant red lens.

The illumination is powered by 20PCS COB CHIPs (LED A) for a wide flood light and 1pc XPE LED (LED B) for a focused spotlight effect. The rechargeable 400mAh li-poly battery ensures sustained use, and a full charge is achieved in just 3 hours.

Operating modes are thoughtfully designed for various scenarios:

Long press for on/off functionality.

Once turned on, a simple click of the switch cycles through the following modes:

50% intensity for both A&B LEDs with a slow flash at 2Hz (5 hours and 20 minutes)

Alternating flash at 60% intensity for A&B LEDs (3.5 hours and 20 minutes)

Sequential flash with 50% intensity for B LED (1Hz) and 50% intensity for A LED (2Hz) (6 hours and 20 minutes)

Simultaneous steady lighting for both A&B LEDs (3.5 hours and 20 minutes)

50% intensity steady lighting for A LED and 50% intensity flash at 2Hz for B LED (3 hours and 20 minutes)

Double-click the switch to effortlessly toggle between flash modes and steady modes.

Steady modes feature:

A steady illumination at 60% intensity (B LED turned off) for 6 hours and 20 minutes.

B steady illumination at 60% intensity (A LED turned off) for 3 hours and 20 minutes.

A&B LEDs steady at 30% intensity for 4 hours and 20 minutes.

A&B LEDs steady at 60% intensity for 2 hours and 30 minutes.

The Auto Brake feature adds an extra layer of safety. Upon sensing a brake, both A&B LEDs will shine at 100% intensity in steady mode for 3 seconds before automatically reverting to the previous mode.

Compact in size (without bracket), the dimensions measure 38.5mm in length, 29mm in width, and 32.2mm in depth. With the bracket included, the total weight is 40.3g. The fine anodizing finish adds a touch of refinement.

The safe mode ensures continued functionality even in low battery situations. When battery levels drop, the light switches to a 50% flash mode, providing an additional 30 minutes of illumination before powering off due to low battery.

Installation is versatile, allowing mounting on seatposts, saddle rails, or belts. With an IP65 waterproof rating, this light remains effective in various weather conditions, further enhancing its reliability during your rides.